Mazda CX-3: Driving Tips / Break-In Period
No special break-in is necessary, but a few
precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of the vehicle.
- Do not race the engine.
- Do not maintain one constant speed,
either slow or fast, for a long period of
time.
- Do not drive constantly at full-throttle or
high engine rpm for extended periods of
time.
- Avoid unnecessary hard stops.
- Avoid full-throttle starts.
How you operate your Mazda determines
how far it will travel on a tank of fuel. Use
these suggestions to help save fuel and
reduce CO2.
Avoid long warm-ups...
Other information:
The MRCC with Stop & Go function setting status and operation conditions are
indicated
on the active driving display.
If there is a problem with the MRCC with Stop & Go function system, MRCC with
Stop &
Go function warning light (amber) turns on...
If any warning light turns on/flashes, take appropriate action for each
light. There is no
problem if the light turns off, however if the light does not turn off or turns
on/flashes again,
consult an Authorized Mazda Dealer.
(Vehicles with type B audio)
The details for some warnings can be viewed on the center display...
Categories
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
NOTE
When the battery power is low, or in
places where there are high-intensity radio
waves or noise, the operational range may
become narrower or the system may not
operate. For determining battery
replacement, Refer to Keyless Entry
System.
read more