Mazda CX-3: If Trouble Arises / When Liftgate Cannot be Opened

Mazda CX-3 (2015-2025) Owner's Manual / If Trouble Arises / When Liftgate Cannot be Opened

If the vehicle battery is dead, the liftgate cannot be unlocked and opened. In this case, the liftgate can be unlocked by taking care of the dead battery situation.

Refer to Jump-Starting.

If the liftgate cannot be unlocked even if the dead battery situation has been resolved, the electrical system may have a malfunction.

In this case, the liftgate can be opened using the following procedure as an emergency measure.

Fold down the rear seatbacks. Refer to Split Folding the Seatbacks.
Remove cover on the interior surface of the liftgate using a flathead screwdriver.
Using a flathead screwdriver, open the inner cover.
Using a flathead screwdriver, turn the lever to the right to unlock the liftgate.

After performing this emergency measure, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.

Warning Sound is Activated

Lights-On Reminder The lights-on reminder is operable when the time setting*1 of the auto headlight off function is off. If lights are on and the ignition is switched to ACC or off, a continuous beep sound will be heard when the driver's door is opened...

Active Driving Display Does Not Operate

If the active driving display does not operate, switch the ignition off and then restart the engine. If the active driving display does not operate even with the engine restarted, have the vehicle inspected at an Authorized Mazda Dealer...

Other information:

Mazda CX-3 (2015-2025) Owner's Manual: Operating Tips for AAC

AAC stands for Advanced Audio Coding, which is standardized voice compression established by the ISO*1 working group (MPEG). Audio data can be created and stored at a higher compression ratio than MP3. This unit plays files with the extensions (...

Mazda CX-3 (2015-2025) Owner's Manual: How to use AUX mode

Switch the ignition to ACC or ON. Press the power/volume dial to turn the audio system on. Press the media button of the audio unit to change to the AUX mode. NOTE When the device is not connected to the auxiliary jack, the mode does not switch to the AUX mode...