Mazda CX-3: Brake System / Brake Assist

Mazda CX-3 (2015-2025) Owner's Manual / When Driving / Brake / Brake System / Brake Assist

During emergency braking situations when it is necessary to depress the brake pedal with greater force, the brake assist system provides braking assistance, thus enhancing braking performance.

When the brake pedal is depressed hard or depressed more quickly, the brakes apply more firmly.

NOTE

  • When the brake pedal is depressed hard or depressed more quickly, the pedal will feel softer but the brakes will apply more firmly. This is a normal effect of the brake assist operation and does not indicate a malfunction.
  • When the brake pedal is depressed hard or depressed more quickly, a motor/ pump operation noise may be heard. This is a normal effect of the brake assist and does not indicate a malfunction.
  • The brake assist equipment does not supersede the functionality of the vehicle's main braking system.

    Warning Light and Brake Pad Wear Indicator

    Warning Light The warning light turns on when the system has a malfunction. Refer to Contact Authorized Mazda Dealer and Have Vehicle Inspected. Brake Pad Wear Indicator When the disc brake pads become worn, the built-in wear indicators contact the disc plates...

    AUTOHOLD

    The AUTOHOLD function automatically holds the vehicle stopped, even if you take your foot off the brake pedal. This function can be best used while stopped in traffic or at a traffic light...

    Other information:

    Mazda CX-3 (2015-2025) Owner's Manual: Cell Phones


    WARNING Please comply with the legal regulations concerning the use of communication equipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous...

    Mazda CX-3 (2015-2025) Owner's Manual: Shift-Lock System


    The shift-lock system prevents shifting out of P unless the brake pedal is depressed. To shift from P: Depress and hold the brake pedal. Start the engine. Press and hold the lock-release button. Move the selector lever. NOTE When the ignition is switched to ACC or the ignition is switched off, the selector lever cannot be shifted from P position...

    Categories

    Speedometer

    The speedometer indicates the speed of the vehicle.

    NOTE

    (Analog speedometer type)

    If a few seconds have elapsed after switching the ignition off, the needle may deviate. However, this does not indicate a problem.

    Speed Unit Selector (Digital Speedometer)(Some models)

    In some countries, you may have to change the speed units between km/h and mph.

    read more

     
    Copyright © 2025 www.macx3.net