Mazda CX-3: Switches and Controls / Fog Lights (Some models)
The fog lights can be used when the ignition is switched ON.
Use this switch to turn on the fog lights. The fog lights will improve visibility at night and during foggy conditions.
The fog lights turn on when the fog light switch is turned to the position and turn off when the switch is turned to the OFF position.
The fog lights turn on when the headlights are turned on. They will not turn on if the headlight switch is in the position or OFF position.
NOTE
- The fog lights will turn off when the headlights are set at high beams.
- (With auto-light control)
If the fog light switch is in the position and the headlight switch is in the AUTO position, the fog lights will turn on when the headlights, the exterior lights turn on.
Daytime Running Lights
Some countries require moving vehicles to
have their lights on (daytime running
lights) during the daytime.
The daytime running lights turn on
automatically when the vehicle starts
moving...
Turn and Lane-Change Signals
The ignition must be switched ON to use
the turn and lane-change signals.
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position...
Other information:
Mazda CX-3 (2015-2026) Owner's Manual: Error Indications
If you see an error indication on the display, take appropriate action according to the following methods. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. CHECK USB When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device...
Mazda CX-3 (2015-2026) Owner's Manual: Sunlight/Temperature Sensor
Sunlight sensor Do not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly. Interior temperature sensor Do not cover the interior temperature sensor. Otherwise, the interior temperature may not adjust correctly...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display Indication
- Indicator Lights
- TCS OFF Switch
- New on site
- Most important about car
Fuel Gauge
The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.
If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible.
If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel. Refer to Taking Action.
