Mazda CX-3: When Driving / Switches and Controls
Mazda CX-3 (2015-2026) Owner's Manual / When Driving / Switches and Controls
- Lighting Control
- Fog Lights (Some models)
- Turn and Lane-Change Signals
- Windshield Wipers and Washer
- Rear Window Wiper and Washer
- Rear Window Defogger
- Horn and Hazard Warning Flasher
Driving Tips
WARNING
Do not let the vehicle move in a direction
opposite to the direction selected by the
selector lever: Do not let the vehicle move backward with
the selector lever in a forward position, or
do not let the vehicle move forward with
the selector lever in the reverse position...
Other information:
Mazda CX-3 (2015-2026) Owner's Manual: Blind Spot Monitoring (BSM)(Some models)
The BSM is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by notifying the driver of the presence of vehicles approaching from the rear in an adjacent lane. The BSM detects vehicles approaching from the rear while traveling in the forward direction at a speed of 10 km/h (6...
Mazda CX-3 (2015-2026) Owner's Manual: Stopping the Advanced Smart City Brake Support (Advanced SCBS) System Operation
The Advanced SCBS system can be temporarily deactivated. When the Advanced SCBS system is turned off, the Smart City Brake Support (SCBS) OFF indicator light turns on. When the engine is restarted, the system becomes operational. Without SCBS OFF switch Refer to Personalization Features...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- When Driving
- Odometer, Trip Meter and Trip Meter Selector (Some models)
- Fuel Gauge
- New on site
- Most important about car
Child-Restraint System Types
In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child-restraint systems: infant seat, child seat, booster seat.
NOTE
Installation position is determined by the type of child-restraint system. Always read the manufacturer's instructions and this owner's manual carefully. Due to variations in the design of child-restraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehicle seating position (or positions) where it is intended to be used. If a previously purchased child-restraint system does not fit, you may need to purchase a different one that will.
Copyright © 2026 www.macx3.net