Mazda CX-3: Manual Transaxle Operation / Gear Shift Indicator (GSI)

Mazda CX-3 (2015-2025) Owner's Manual / When Driving / Manual Transaxle Operation / Gear Shift Indicator (GSI)

The GSI supports you to obtain optimum fuel economy and smooth driving. It displays the selected gear position in the instrument cluster as well as notifies the driver to change to the most suitable gear position corresponding to the actual driving condition.

Mazda CX-3. Gear Shift Indicator (GSI)

CAUTION

Do not rely solely on the shift-up/ shift-down recommendations by indications. The actual driving situation might require shift operations different from indication. To avoid the risk of accidents, the road and traffic conditions have to be judged correctly by the driver before shifting.

NOTE

The GSI turns off when the following operations are performed.

The vehicle is stopped.
The vehicle is put in neutral.
The vehicle is driven in reverse.
The clutch is not fully engaged when accelerating from a stop.
The clutch pedal remains depressed for 2 seconds or longer while driving.

Manual Transaxle Operation

Manual Transaxle Shift Pattern The shift pattern of the transaxle is conventional, as shown. Depress the clutch pedal all the way down while shifting; then release it slowly...

Recommendations for Shifting

Upshifting For normal acceleration, Mazda recommends these shift points: For cruising, Mazda recommends these shift points: Downshifting When you must slow down in heavy traffic or on a steep upgrade, downshift before the engine starts to overwork...

Other information:

Mazda CX-3 (2015-2025) Owner's Manual: Vehicle Loading

WARNING Do not tow a trailer with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could result in vehicle damage. This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability...

Mazda CX-3 (2015-2025) Owner's Manual: Removing a Flat Tire

WARNING When jacking-up a vehicle, always shift the shift lever to 1st or R position (manual transaxle vehicle) or shift the selector lever to P position (automatic transaxle vehicle), apply the parking brake, and place wheel blocks in the position diagonally opposed to the jack: Changing a flat tire without using wheel blocks is dangerous because the vehicle may move and fall off the jack even with the shift lever in 1st or R position, or the selector lever is in P position, which could result in an accident...