Mazda CX-3: Bluetooth® / Introduction

Mazda CX-3 (2015-2026) Owner's Manual / Interior Features / Audio Set [Type A (non-touchscreen)] / Bluetooth® / Introduction

Bluetooth® Hands-Free outline

When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit, a call can be made or received by pressing the talk button, pick-up button, or hang-up button on the audio remote control switch. For example, even if a device (mobile phone) is in your coat pocket, a call can be made without taking the device (mobile phone) out and operating it directly.

Bluetooth® audio outline

When a portable audio unit equipped with the Bluetooth® communication function is paired to the vehicle, you can listen to music stored on the paired portable audio device from the vehicle's speakers. It is not necessary to connect the portable audio device to the vehicle's external input terminal. After programming, operate the vehicle audio control panel to play/ stop the audio.

NOTE

  • For your safety, a device can be paired only when the vehicle is parked. If the vehicle starts to move, the pairing procedure will end. Park the vehicle in a safe place before pairing.
  • The communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or less.
  • Basic audio operation is available using voice commands even if Bluetooth® is not connected.

CAUTION

Some Bluetooth® mobile devices are not compatible with the vehicle. Consult an Authorized Mazda Dealer, Mazda's call center or Web support center for information regarding Bluetooth® mobile device compatibility:

Applicable Bluetooth® specification (Recommended) Ver. 2.0

    Bluetooth®

    ..

    Component Parts

    Audio unit Talk button, Pick-up button and Hang-up button Microphone Microphone (hands-free) The microphone is used for speaking voice commands or when making a Hands-free call...

    Other information:

    Mazda CX-3 (2015-2026) Owner's Manual: i-ACTIVSENSE (Some models)


    i-ACTIVSENSE is a collective term covering a series of advanced safety and driver support systems which make use of a Forward Sensing Camera (FSC) and radar sensors. These systems consist of active safety and pre-crash safety systems. These systems are designed to assist the driver in safer driving by reducing the load on the driver and helping to avert collisions or reduce their severity...

    Mazda CX-3 (2015-2026) Owner's Manual: Starting a Flooded Engine


    If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: If the engine does not start within 5 seconds on the first try, wait 10 seconds and try again. Make sure the parking brake is on. Depress the accelerator all the way and hold it there...

    Categories

    Anchor Bracket

    Anchor brackets for securing child-restraint systems are equipped in the vehicle. Locate each anchor position using the illustration.

    To install a child-restraint system, remove the head restraint. Always follow the instruction manual accompanying the child-restraint system.

    Anchor bracket location

    Use the indicated anchor bracket locations when installing a child-restraint system equipped with a tether.

    Mazda CX-3. Anchor Bracket

    read more

     
    Copyright © 2026 www.macx3.net