Mazda CX-3: When Driving / Start/Stop Engine

Mazda CX-3 (2015-2026) Owner's Manual / When Driving / Start/Stop Engine

Ignition Switch

Push Button Start Positions The system operates only when the driver is in the vehicle or within operational range while the key is being carried...

Other information:

Mazda CX-3 (2015-2026) Owner's Manual: High Beam Control System (HBC)(Some models)

The HBC determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights between high and low beams. Refer to Forward Sensing Camera (FSC). While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the headlights are switched to high beams when there are no vehicles ahead or approaching in the opposite direction...

Mazda CX-3 (2015-2026) Owner's Manual: Emergency Locking Mode and Automatic Locking Mode

Emergency Locking Mode When the seat belt is fastened, it will always be in the emergency locking mode. In the emergency locking mode, the belt remains comfortable on the occupant and the retractor will lock in position during a collision. If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it out slowly...

Categories

Floor Mat

We recommend the use of Genuine Mazda floor mats.

WARNING

Make sure the floor mats are hooked on the retention pins to prevent them from bunching up under the foot pedals: Using a floor mat that is not secured is dangerous as it will interfere with the accelerator and brake pedal operation, which could result in an accident.

Do not install two floor mats, one on top of the other, on the driver's side: Installing two floor mats, one on top of the other, on the driver's side is dangerous as the retention pins can only keep one floor mat from sliding forward. Loose floor mat(s) will interfere with the foot pedals and could result in an accident. If using an all-weather mat for winter use always remove the original floor mat.

Mazda CX-3. Floor Mat