Mazda CX-3: How to use Android Auto™ mode (Some models) / How to use the Android Auto™ mode
Insert an Android™ Smartphone-genuine connector cord into the USB terminal
indicated by
the 
icon to connect the
Smartphone.
Refer to How to connect USB port/Auxiliary jack.
NOTE
- When an Android™ Smartphone connected to Bluetooth® is connected to the vehicle's USB terminal, Bluetooth® is used by Android Auto™ and the system switches to Android Auto™ mode.
- If the Android™ Smartphone is connected to a USB terminal with no
icon indicated,
the system operates in USB mode.
Display of Android Auto™ Mode Screen
Use any of the following methods to display the Android Auto™ mode screen in the center display.
- Select
on the home screen,
and select 
from the
Applications screen. - Select
on the home screen. - Press and hold
on the
commander switch.
Android Auto™ mode home screen
NOTE
The media displayed on the Android Auto™ home screen may differ depending on the use conditions and version of the connected Android™ Smartphone.
`
Convenient ways to use Android Auto™ mode
*1 The voice recognition function of Mazda Connect cannot be used while Android Auto™ is connected.
To end Android Auto™
To end the Android Auto™ mode, disconnect the Android™-genuine connector cord from the USB terminal or disconnect the Android™ Smartphone from the connector cord.
If Android Auto™ cannot be connected
When the message, “Mobile Device Error”, is displayed and Android Auto™ cannot be connected
Make sure that the Android™ Smartphone in question is compatible with Android Auto™. Before trying to reconnect your Android™ Smartphone to the connector cord, do the Bluetooth® device pairing again.
If the Android Auto™ do not operate, please do these steps
Depending on your Android™ Smartphone, the connection setting may have been
in
charging mode only when the connector cord is connected.
In this case, switch off the Android Auto™ connection setting once, and then
switch it back
on while connected to USB mode.
The connection setting can be changed to the Android Auto™ connection in the
tab
on the Settings screen.
What is Android Auto™?
Android Auto™ is an application which allows the operation of an Android™
Smartphone
using the vehicle's audio. Android Auto™ functions such as the phone, messages,
music,
and map can be used with the vehicle's audio system...
Bluetooth®
..
Other information:
Mazda CX-3 (2015-2025) Owner's Manual: Tilt/Slide Operation
The moonroof can be opened or closed electrically only when the ignition is switched ON. Before leaving the vehicle or washing your Mazda, make sure the moonroof is completely closed so that water does not get inside the cabin area. After washing your Mazda or after it rains, wipe the water off the moonroof before operating it to avoid water penetration which could cause rust and water damage to your headliner...
Mazda CX-3 (2015-2025) Owner's Manual: Switching the display (only AVRCP Ver. 1.3)
The information displayed on the audio display changes as follows each time the text button (3) is pressed during playback. NOTE If title information is not available, “NO TITLE” is displayed. This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk ...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- Interior Equipment (View A)
- TCS OFF Switch
- Trip Computer and INFO Switch (Some models)
- New on site
- Most important about car
Child-Restraint System Types
In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child-restraint systems: infant seat, child seat, booster seat.
NOTE
Installation position is determined by the type of child-restraint system. Always read the manufacturer's instructions and this owner's manual carefully. Due to variations in the design of child-restraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehicle seating position (or positions) where it is intended to be used. If a previously purchased child-restraint system does not fit, you may need to purchase a different one that will.