Mazda CX-3: Seat Belt / Unfastening the Seat Belt and Front Shoulder Belt Adjuster
Unfastening the Seat Belt
Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.

NOTE
If a belt does not fully retract, inspect it for kinks and twists. If
it is still not retracting properly, have it inspected at an Authorized Mazda
Dealer.
Front Shoulder Belt Adjuster

Make sure the adjuster is locked.
Position the lap belt as low as possible, not
on the abdominal area, then adjust the
shoulder belt so that it fits snugly against
your body.
Before fastening the rear seat belt, make
sure that the seat belt passes through the seat belt guide correctly and it is
not
twisted...
If it detects that the occupant seat belt is
unfastened, the warning light or beep alerts the occupant.
Refer to Taking Action.
Refer to Seat Belt Warning Beep...
Other information:
Depress the brake pedal and press the
AUTOHOLD switch. The AUTOHOLD is turned off and the AUTOHOLD standby
indicator light turns off.
NOTE
When the brakes are not held such as
while driving the vehicle, the
AUTOHOLD can be turned off only by
pressing the AUTOHOLD switch...
Introduction
Be careful not to hurt yourself when inspecting your vehicle, replacing a
tire, or doing some
kind of maintenance such as car washing. In particular, wear thick work gloves
such as
cotton gloves when touching areas that are difficult to see while inspecting or
working on
your vehicle...
Categories
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition is switched ON. We
recommend keeping the tank over 1/4 full.

If the low fuel warning light illuminates or
the fuel level is very low, refuel as soon as
possible.
If inconsistency in engine performance or
stalling occurs due to low fuel level
conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US
gal,
2.2 Imp gal) of fuel.
Refer to Taking Action.
read more