Mazda CX-3: Owner Maintenance / Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should be
lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
Inspecting Washer Fluid Level
WARNING
Use only windshield washer fluid or plain
water in the reservoir: Using radiator antifreeze as washer fluid is
dangerous...
CAUTION
Hot waxes applied by automatic car
washers have been known to affect the
wiper's ability to clean windows.
To prevent damage to the wiper blades,
do not use gasoline, kerosene, paint
thinner, or other solvents on or near
them...
Other information:
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine
coolant other than FL-22 may
cause serious damage to the engine and cooling system...
Connect the iPhone® by inserting the Apple®-genuine connector cord to the USB
terminal
indicated by the mark.
Refer to How to connect USB port/Auxiliary jack.
NOTE
When you switch your iPhone® connection from Bluetooth® to the
vehicle's USB terminal,
the system switches to Apple CarPlay™...
Categories
WARNING
Do not stack cargo or objects higher than
the seatbacks:
Cargo stacked higher than the seatbacks is
dangerous. It can block your view in the
rearview mirror, which might cause you to
hit another car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.

read more