Mazda CX-3: Lighting Control / Coming Home Light

Mazda CX-3 (2015-2024) Owner's Manual / When Driving / Switches and Controls / Lighting Control / Coming Home Light

The coming home light turns on the headlights (low beams) when the lever is operated.

To turn on the lights

When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.

The headlights turn off after a certain period of time has elapsed after all of the doors are closed.

Mazda CX-3. Coming Home Light

NOTE

The time until the headlights turn off after all of the doors are closed can be changed.
Refer to Personalization Features.
If no operations are done for 3 minutes after the lever is pulled, the headlights turn off.
The headlights turn off if the lever is pulled again while the headlights are illuminated.

Flashing the Headlights

Can be used when the ignition is switched ON. To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on)...

Leaving Home Light

The leaving home light turns on the lights when the transmitter unlock button is pressed while away from the vehicle. The following lights turn on when the leaving home light is operated...

Other information:

Mazda CX-3 (2015-2024) Owner's Manual: Commander switch operation

NOTE For safety reasons, some operations are disabled while the vehicle is being driven. Volume dial operation Press the volume dial to mute and pause. However, while an audio source which cannot be paused such as FM radio is playing, only mute is available...

Mazda CX-3 (2015-2024) Owner's Manual: Turn and Lane-Change Signals

The ignition must be switched ON to use the turn and lane-change signals. Turn Signals Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed. If the indicator light continues to flash after a turn, manually return the lever to its original position...