Mazda CX-3: Cruise Control (Some models) / Cruise Control Switch

NOTE
If your Mazda has the following steering switch, your Mazda is equipped
with the Mazda
Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)
system.
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function).

With cruise control, you can set and automatically maintain any speed of more
than about
25 km/h (16 mph).
WARNING
Do not use the cruise control under the following conditions:
Using the cruise control under the following conditions is dangerous and could
result in loss
of vehicle control...
Cruise main indication (white)
The cruise main indication (white) is
displayed in the instrument cluster when
the cruise control system is activated...
Other information:
Inspecting Brake/Clutch Fluid Level
WARNING
If the brake/clutch fluid level is low, have
the brakes inspected: A low brake/clutch fluid level is dangerous.
A low level could indicate brake lining wear
or a brake system leak which could cause
the brakes to fail and lead to an accident...
This vehicle has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
WARNING
Do not coast with the engine stalled or
turned off, find a safe place to stop: Coasting with the engine stalled or
turned
off is dangerous...
Categories
Opening the liftgate with Electric liftgate opener
Unlock the doors and liftgate, then press
the electric liftgate opener on the liftgate and raise the liftgate when the
latch
releases.

read more