Mazda CX-3: Manual Type / Dehumidifying
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
- Set the mode selector dial to the
desired position.
- (Type A)
Set the air intake selector to the outside
air position.
(Type B)
Set the air intake selector to the
position.
- . Set the temperature control dial to the
desired position.
- Set the fan control dial to the desired
speed.
- Turn on the air conditioner by pressing
the A/C switch.
NOTE
One of the functions of the air conditioner
is dehumidifying the air and, to use this
function, the temperature does not have to
be set to cold. Therefore, set the
temperature control dial to the desired
position (hot or cold) and turn on the air
conditioner when you want to dehumidify
the cabin air.
Set the mode selector dial to the
position.
(Type B)
Set the air intake selector to the
position.
Set the temperature control dial to the
desired position...
Other information:
Position the lap belt as low as possible, not
on the abdominal area, then adjust the
shoulder belt so that it fits snugly against
your body.
Before fastening the rear seat belt, make
sure that the seat belt passes through the seat belt guide correctly and it is
not
twisted...
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine
coolant other than FL-22 may
cause serious damage to the engine and cooling system...
Categories

NOTE
The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light.
(With theft-deterrent system)
The hazard
warning lights flash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System.
(With the advanced keyless function)
read more