Mazda CX-3: Manual Type / Windshield Defrosting and Defogging

Mazda CX-3 (2015-2026) Owner's Manual / Interior Features / Climate Control System / Manual Type / Windshield Defrosting and Defogging

  1. Set the mode selector dial to the Mazda CX-3. Windshield Defrosting and Defogging position.
  2. (Type B)
    1. Set the air intake selector to the Mazda CX-3. Windshield Defrosting and Defogging position.
  3. Set the temperature control dial to the desired position.
  4. Set the fan control dial to the desired speed.
  5. If dehumidified heating is desired, turn on the air conditioner.

WARNING

Do not defog the windshield using the Mazda CX-3. Windshield Defrosting and Defogging position with the temperature control set to the cold position: Using the Mazda CX-3. Windshield Defrosting and Defogging position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the Mazda CX-3. Windshield Defrosting and Defogging position.

NOTE

  • (Type A)

    For maximum defrosting, turn on the air conditioner, set the temperature control dial to the extreme hot position, and turn the fan control dial fully clockwise.

  • (Type B)

    For maximum defrosting, turn on the air conditioner, set the temperature control dial to the extreme hot position, and the fan control dial to position 4.

  • If warm air is desired at the floor, set the mode selector dial to the Mazda CX-3. Windshield Defrosting and Defogging position.
  • (Type A)

    In the Mazda CX-3. Windshield Defrosting and Defogging or Mazda CX-3. Windshield Defrosting and Defogging position, the air conditioner is automatically turned on and the outside air position is automatically selected to defrost the windshield. In the Mazda CX-3. Windshield Defrosting and Defogging or Mazda CX-3. Windshield Defrosting and Defogging position, the outside air position cannot be changed to the recirculated air position.

    Ventilation

    Set the mode selector dial to the position. (Type A)Set the air intake selector to the outside air position. (Type B) Set the air intake selector to the  position...

    Dehumidifying

    Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. Set the mode selector dial to the desired position...

    Other information:

    Mazda CX-3 (2015-2026) Owner's Manual: Collision Warning


    If there is the possibility of a collision with a vehicle ahead, the beep sounds continuously and a warning is indicated in the active driving display. NOTE (Without SCBS OFF switch)The operation distance and volume of the collision warning can be changed...

    Mazda CX-3 (2015-2026) Owner's Manual: Device selection


    If several devices have been paired, the Bluetooth® unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device priority after the link has been changed is maintained even when the ignition is switched off...

    Categories

    Anchor Bracket

    Anchor brackets for securing child-restraint systems are equipped in the vehicle. Locate each anchor position using the illustration.

    To install a child-restraint system, remove the head restraint. Always follow the instruction manual accompanying the child-restraint system.

    Anchor bracket location

    Use the indicated anchor bracket locations when installing a child-restraint system equipped with a tether.

    Mazda CX-3. Anchor Bracket

    read more

     
    Copyright © 2026 www.macx3.net