Mazda CX-3: Cruise Control (Some models) / To Increase Cruising Speed

Mazda CX-3 (2015-2026) Owner's Manual / When Driving / Cruise Control (Some models) / To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

Press the Mazda CX-3. To Increase Cruising Speed switch and hold it. Your vehicle will accelerate. Release the switch at the desired speed.

Press the Mazda CX-3. To Increase Cruising Speed switch and release it immediately to adjust the preset speed. Multiple operations will increase the preset speed according to the number of times it is operated.

Increasing speed with a single Mazda CX-3. To Increase Cruising Speed switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph) Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To increase speed using accelerator pedal

Depress the accelerator pedal to accelerate to the desired speed. Press the Mazda CX-3. To Increase Cruising Speed switch and release it immediately.

NOTE

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.

    To Set Speed

    Activate the cruise control system by pressing the ON switch. The cruise main indication (white) is displayed. Accelerate to the desired speed, which must be more than 25 km/h (16 mph)...

    To Decrease Cruising Speed and Resume Cruising Speed at More Than 25 km/h (16 mph)

    To Decrease Cruising Speed Press the switch and hold it. The vehicle will gradually slow. Release the switch at the desired speed. Press the switch and release it immediately to adjust the preset speed...

    Other information:

    Mazda CX-3 (2015-2026) Owner's Manual: Recording of Vehicle Data


    This vehicle is equipped with a computer which records the following main vehicle data related to vehicle controls, operation, and other driving conditions. Recorded data Vehicle conditions such as engine speed and vehicle speed Driving operation conditions such as accelerator and brake pedals, and information related to the environmental circumstances while the vehicle is driven Malfunction diagnosis information from each on-vehicle computer Information related to controls of other on-vehicle computers NOTE The recorded data may vary depending on the vehicle grade and optional equipment...

    Mazda CX-3 (2015-2026) Owner's Manual: Operation


    System triggering conditions The horn sounds intermittently and the hazard warning lights flash for about 30 seconds when the system is triggered by any one of the following: Unlocking a door with the auxiliary key, door lock switch, or an inside door-lock knob...

    Categories

    Fuel Gauge

    The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

    Mazda CX-3. Fuel Gauge

    If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible.

    If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel. Refer to Taking Action.

    read more

     
    Copyright © 2026 www.macx3.net