Mazda CX-3: Warning/Indicator Lights / Low Engine Coolant Temperature Indicator Light (Blue)

The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
If the low engine coolant temperature
indicator light remains illuminated after
the engine has been sufficiently warmed
up, the temperature sensor could have a
malfunction. Consult an Authorized
Mazda Dealer.
When the ignition is switched ON, the
wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on when
the preset maintenance period arrives...
Manual Transaxle Shift Pattern
The shift pattern of the transaxle is
conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly...
Other information:
Adjusting the Volume
To increase the volume, press up the
volume switch .
To decrease the volume, press down the
volume switch .
Seek Switch
AM/FM radio
Press the seek switch . The radio
switches to the next/previous stored
station in the order that it was stored...
Set the mode selector dial to the
position.
(Type A)Set the air intake selector to the outside
air position.
(Type B)
Set the air intake selector to the
position.
Set the temperature control dial to the
desired position.
Set the fan control dial to the desired
speed...
Categories
The speedometer indicates the speed of the vehicle.
NOTE
(Analog speedometer type)
If a few seconds have elapsed after
switching the ignition off, the needle may
deviate. However, this does not indicate a
problem.
Speed Unit Selector (Digital Speedometer)(Some models)
In some countries, you may have to
change the speed units between km/h and
mph.
read more