Mazda CX-3: Lighting Control / Headlight High-Low Beam
The headlights switch between high and
low beams by moving the lever forward or
backward.

When the headlight high-beams are on, the
headlight high-beam indicator light is
turned on.

Turn the headlight switch to turn the headlights, other exterior lights and
dashboard
illumination on or off.
When the lights are turned on, the lights-on indicator light in the
instrument cluster turns on...
Can be used when the ignition is switched
ON.
To flash the headlights, pull the lever fully
towards you (the headlight switch does not
need to be on)...
Other information:
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine
coolant other than FL-22 may
cause serious damage to the engine and cooling system...
WARNING
Do not stack cargo or objects higher than
the seatbacks:
Cargo stacked higher than the seatbacks is
dangerous. It can block your view in the
rearview mirror, which might cause you to
hit another car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window...
Categories

NOTE
The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light.
(With theft-deterrent system)
The hazard
warning lights flash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System.
(With the advanced keyless function)
read more