Mazda CX-3: Door Locks / Locking, Unlocking with Transmitter and Door-Lock Switch

Mazda CX-3 (2015-2024) Owner's Manual / Before Driving / Doors and Locks / Door Locks / Locking, Unlocking with Transmitter and Door-Lock Switch

Locking, Unlocking with Transmitter

All doors and the liftgate can be locked/ unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System.

Locking, Unlocking with Door-Lock Switch

All doors and the liftgate lock automatically when the lock side is pressed. They unlock when the unlock side is pressed.

Driver's door

Mazda CX-3. Switch

Front passenger's door

Mazda CX-3. Switch

To lock all the doors and the liftgate from an open front door, press the lock side of the door lock switch and then close the door.

NOTE

When locking the doors this way, be careful not to leave the key inside the vehicle.

Locking, Unlocking with Request Switch (With the advanced keyless function)

All doors and the liftgate can be locked/ unlocked by pressing the request switch on the front doors while the key is being carried. The request switch on the liftgate can only be used to lock all doors and the liftgate...

Auto Lock/Unlock Function

WARNING Do not pull the inner handle on a front door: Pulling the inner handle on a front door while the vehicle is moving is dangerous. Passengers can fall out of the vehicle if the door opens accidentally , which could result in death or serious injury...

Other information:

Mazda CX-3 (2015-2024) Owner's Manual: Lane Departure Warning System (LDWS)(Some models)

The LDWS notifies the driver that the vehicle may be deviating from its lane. The system detects the white or yellow lines on the traffic lane using the Forward Sensing Camera (FSC) and if it determines that the vehicle may be deviating from its lane, it notifies the driver using the active driving display (vehicles with active driving display), and by flashing the LDWS warning light and activating the LDWS warning beep...

Mazda CX-3 (2015-2024) Owner's Manual: Ventilation

Set the mode selector dial to the position. (Type A)Set the air intake selector to the outside air position. (Type B) Set the air intake selector to the position. Set the temperature control dial to the desired position. Set the fan control dial to the desired speed...