Mazda CX-3: If Trouble Arises / Parking in an Emergency
The hazard warning lights should always be used when you stop on or near a roadway in an emergency.
The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Depress the hazard warning flasher and all the turn signals will flash. The hazard warning indicator lights in the instrument cluster flash simultaneously.
NOTE
The turn signals do not work when the hazard warning lights are on.
Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.
Other information:
Mazda CX-3 (2015-2026) Owner's Manual: High Beam Control System (HBC)(Some models)
The HBC determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights between high and low beams. Refer to Forward Sensing Camera (FSC). While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the headlights are switched to high beams when there are no vehicles ahead or approaching in the opposite direction...
Mazda CX-3 (2015-2026) Owner's Manual: Declaration of Conformity
Keyless Entry System/Immobilizer System Blind Spot Monitoring (BSM) System Tire Pressure Monitoring System Bluetooth® Hands-Free Type A U.S.A. and Canada FCC ID: NT8MBLUEC09 IC:3043A-MBLUEC09 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- Engine Start Function When Key Battery is Dead
- Indicator Lights
- TCS OFF Switch
- New on site
- Most important about car
Child-Restraint System Types
In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child-restraint systems: infant seat, child seat, booster seat.
NOTE
Installation position is determined by the type of child-restraint system. Always read the manufacturer's instructions and this owner's manual carefully. Due to variations in the design of child-restraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehicle seating position (or positions) where it is intended to be used. If a previously purchased child-restraint system does not fit, you may need to purchase a different one that will.