Mazda CX-3: Fully Automatic Type / Sunlight/Temperature Sensor
Sunlight sensor
Do not place objects on the sunlight
sensor. Otherwise, the interior temperature
may not adjust correctly.

Interior temperature sensor
Do not cover the interior temperature
sensor. Otherwise, the interior temperature
may not adjust correctly.

Set the mode selector dial to the
position and turn the fan control dial to the
desired speed.
In this position, the outside air position is
automatically selected, and when the fan
control dial is ON, the air conditioner
automatically turns on...
Other information:
The HBC determines the conditions in front of the vehicle using the Forward
Sensing
Camera (FSC) while driving in darkness to automatically switch the headlights
between
high and low beams.
Refer to Forward Sensing Camera (FSC).
While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the
headlights are
switched to high beams when there are no vehicles ahead or approaching in the
opposite
direction...
Turn the wipers on by pressing the lever
up or down.
With intermittent wiper
Variable-speed intermittent wipers
Set the lever to the intermittent position
and choose the interval timing by rotating
the ring.
With auto-wiper control
Auto-wiper control (Some models)
When the wiper lever is in the AUTO
position, the rain sensor senses the amount
of rainfall on the windshield and turns the
wipers on or off automatically (off―intermittent―low speed―high
speed)...
Categories
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition is switched ON. We
recommend keeping the tank over 1/4 full.

If the low fuel warning light illuminates or
the fuel level is very low, refuel as soon as
possible.
If inconsistency in engine performance or
stalling occurs due to low fuel level
conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US
gal,
2.2 Imp gal) of fuel.
Refer to Taking Action.
read more