Mazda CX-3: Cruise Control (Some models) / Activation/Deactivation

Mazda CX-3 (2015-2024) Owner's Manual / When Driving / Cruise Control (Some models) / Activation/Deactivation

To activate the system, press the ON switch. The cruise main indication (white) is displayed.

To deactivate the system, press the OFF/CAN switch.

The cruise main indication (white) turns off.

WARNING

lways turn off the cruise control system when it is not in use: Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.

NOTE

When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF with the cruise control system operable, the system will be operable when the ignition is switched ON the next time.

    Cruise main indication (white), Cruise Set Indication (White)/Indicator Light (Green)

    Cruise main indication (white) The cruise main indication (white) is displayed in the instrument cluster when the cruise control system is activated...

    To Set Speed

    Activate the cruise control system by pressing the ON switch. The cruise main indication (white) is displayed. Accelerate to the desired speed, which must be more than 25 km/h (16 mph)...

    Other information:

    Mazda CX-3 (2015-2024) Owner's Manual: Automatic Brake Operation Display


    The automatic brake operation display is indicated on the active driving display after the Advanced SCBS is operated. NOTE The collision warning beep sounds intermittently while the Advanced SCBS brake or brake assist (Advanced SCBS brake assist) is operating...

    Mazda CX-3 (2015-2024) Owner's Manual: Voice recognition re-learning


    If voice recognition learning has already been done. Press the pick-up button or talk button with a short press. Say: [Beep] “Voice training” Prompt: “Enrollment is enabled/ disabled. Would you like to disable/ enable or retrain?” Say: [Beep] “Retrain” Prompt: “This operation must be performed in a quiet environment while the vehicle is stopped...

    Categories

    Operational Range

    The system operates only when the driver is in the vehicle or within operational range while the key is being carried.

    NOTE

    When the battery power is low, or in places where there are high-intensity radio waves or noise, the operational range may become narrower or the system may not operate. For determining battery replacement, Refer to Keyless Entry System.

    read more

     
    Copyright © 2024 www.macx3.net