Mazda CX-3: Power Windows / Jam-safe Window

Mazda CX-3 (2015-2026) Owner's Manual / Before Driving / Windows / Power Windows / Jam-safe Window

If foreign matter is detected between the window and the window frame while the window is closing automatically (refer to Auto-opening/Closing on page 3-30), the window stops closing and automatically opens partway.

NOTE

The jam-safe function may operate under the following conditions:
- A strong impact is detected while the window is closing automatically.
- Window is closing automatically in very low temperatures.
- In the event the jam-safe function activates and the power window cannot be closed automatically, pull and hold the switch and the window will close.
- The jam-safe window function does not operate until the system has been reset.

Auto-opening/Closing

To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically. To fully close the window automatically, pull the switch completely up, then release...

Moonroof (Some models)

The moonroof can be opened or closed when operating the overhead tilt/slide switch at the front seats. WARNING Do not let passengers stand up or extend part of the body through the open moonroof while the vehicle is moving: Extending the head, arms, or other parts of the body through the moonroof is dangerous...

Other information:

Mazda CX-3 (2015-2026) Owner's Manual: Flashing the Headlights

Can be used when the ignition is switched ON. To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on). The headlight high-beam indicator light in the instrument cluster illuminates simultaneously. The lever will return to the normal position when released...

Mazda CX-3 (2015-2026) Owner's Manual: Dehumidifying

Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. Set the mode selector dial to the desired position. (Type A)Set the air intake selector to the outside air position. (Type B) Set the air intake selector to the position...