Mazda CX-3: Fully Automatic Type / Operation of Automatic Air
Conditioner
- Set the mode selector dial to the
AUTO position.
- Set the air intake selector to the outside
air position (indicator light turned off).
NOTE
If the recirculated air position is used
for long periods in cold weather or
high humidity, the windshield may fog
up more easily.
- Set the fan control dial to the AUTO
position.
- Press the A/C switch to operate the air
conditioner (turn indicator light on).
- Set the temperature control dial to the
desired position.
- To turn off the system, set the fan
control dial to the 0 position.
NOTE
- Setting the temperature to maximum hot
or cold will not provide the desired
temperature at a faster rate.
- When selecting heat, the system will
restrict airflow until it has warmed to
prevent cold air from blowing out of the
vents.
Temperature control dial
This dial controls temperature. Turn it
clockwise for hot and counterclockwise
for cold.
Fan control dial
The fan has seven speeds...
Set the mode selector dial to the
position and turn the fan control dial to the
desired speed.
In this position, the outside air position is
automatically selected, and when the fan
control dial is ON, the air conditioner
automatically turns on...
Other information:
NOTE
If the following occurs while driving, it could indicate a flat tire.
Steering becomes difficult.
The vehicle begins to vibrate excessively.
The vehicle pulls in one direction.
If you have a flat tire, drive slowly to a
level spot that is well off the road and out
of the way of traffic to change the tire...
CAUTION
When starting the engine by holding the
transmitter over the push button start due
to a dead key battery or a malfunctioning
key, be careful not to allow the following,
otherwise the signal from the key will not
be received correctly and the engine may
not start...
Categories
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
NOTE
When the battery power is low, or in
places where there are high-intensity radio
waves or noise, the operational range may
become narrower or the system may not
operate. For determining battery
replacement, Refer to Keyless Entry
System.
read more