Mazda CX-3: Mirrors / Outside Mirrors

Mazda CX-3 (2015-2025) Owner's Manual / Before Driving / Mirrors / Outside Mirrors

WARNING

Be sure to look over your shoulder before changing lanes:

Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is dangerous. You could have a serious accident. What you see in the convex mirror is closer than it appears.

Mirror type

Flat type (driver's side)

Flat surface mirror.

Convex type (front passenger side)

The mirror has single curvature on its surface.

Power mirror adjustment

The ignition must be switched to ACC or ON position.

To adjust:

Rotate the mirror switch to the left or right R to choose the left or right side mirror.

Press the mirror switch in the appropriate direction.

Mazda CX-3. Outside Mirrors

After adjusting the mirror, lock the control by rotating the switch in the center position.

Folding mirror

WARNING

Always return the outside mirrors to the driving position before you start driving:

Driving with the outside mirrors folded in is dangerous. Your rear view will be restricted, and you could have an accident.

Manually fold the outside mirror rearward until it is flush with the vehicle.

Mazda CX-3. Outside Mirrors

Mirrors

B..

Rearview Mirror

WARNING Do not stack cargo or objects higher than the seatbacks: Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes...

Other information:

Mazda CX-3 (2015-2025) Owner's Manual: Operation of Automatic Air Conditioner

Set the mode selector dial to the AUTO position. Set the air intake selector to the outside air position (indicator light turned off).NOTE If the recirculated air position is used for long periods in cold weather or high humidity, the windshield may fog up more easily...

Mazda CX-3 (2015-2025) Owner's Manual: Removing a Flat Tire

WARNING When jacking-up a vehicle, always shift the shift lever to 1st or R position (manual transaxle vehicle) or shift the selector lever to P position (automatic transaxle vehicle), apply the parking brake, and place wheel blocks in the position diagonally opposed to the jack: Changing a flat tire without using wheel blocks is dangerous because the vehicle may move and fall off the jack even with the shift lever in 1st or R position, or the selector lever is in P position, which could result in an accident...