Mazda CX-3: Scheduled Maintenance / Scheduled Maintenance (U.S.A., Canada, and Puerto Rico)
Follow Schedule 1 if the vehicle is operated mainly where none of the
following conditions
(severe driving conditions)apply.
- Repeated short-distance driving
- Driving in dusty conditions
- Driving with extended use of brakes
- Driving in areas where salt or other corrosive materials are used
- Driving on rough or muddy roads
- Extended periods of idling or low-speed operation
- Driving for long periods in cold temperatures or extremely humid
climates
- Driving in extremely hot conditions
- Driving in mountainous conditions continually
If any do apply, follow Schedule 2. (Canada residents follow Schedule 2.)
Vehicles using Engine Oil Flexible Maintenance
Engine Oil Flexible Maintenance is selected by default for U.S.A. and Puerto
Rico
residents.
If any following conditions do apply, follow Schedule 2 with engine oil fixed
maintenance.
- Extended periods of idling or low-speed operation such as police car,
taxi or driving
school car
- Driving in dusty conditions
The vehicle calculates the remaining oil life based on engine operating
conditions. The
vehicle lets you know when an oil change is due by illuminating the wrench
indicator light
in the instrument cluster. Change the oil as soon as possible within the next
1,000 km (600
mile) or 15 days. Refer to Maintenance Monitor for the details.
NOTE
- Please ensure that the Flexible Oil Maintenance Setting is reset
after each Oil and Filter
replacement.
- For maintenance guidelines beyond the miles/months listed, follow
the maintenance
intervals provided in the Scheduled Maintenance Tables.
U.S.A. and Puerto Rico residents - Engine oil flexible maintenance
interval
Use when the maintenance monitor for “Oil Change” is set to “Flexible”...
Other information:
Follow either of these procedures.
To increase speed using cruise control switch
Press the switch and hold it.
Your
vehicle will accelerate. Release the switch
at the desired speed.
Press the switch and release it
immediately to adjust the preset speed...
The fog lights can be used when the
ignition is switched ON.
Use this switch to turn on the fog lights.
The fog lights will improve visibility at
night and during foggy conditions.
The fog lights turn on when the fog light
switch is turned to the position and turn
off when the switch is turned to the OFF
position...
Categories

NOTE
The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light.
(With theft-deterrent system)
The hazard
warning lights flash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System.
(With the advanced keyless function)
read more