Mazda CX-3: When Driving / ABS/TCS/DSC

Hill Launch Assist (HLA)

HLA is a function which assists the driver in accelerating from a stop while on a slope. When the driver releases the brake pedal and depresses the accelerator pedal while on a slope, the function prevents the vehicle from rolling...

Antilock Brake System (ABS)

The ABS control unit continuously monitors the speed of each wheel. If one wheel is about to lock up, the ABS responds by automatically releasing and reapplying that wheel's brake...

Other information:

Mazda CX-3 (2015-2024) Owner's Manual: Removing a Flat Tire

WARNING When jacking-up a vehicle, always shift the shift lever to 1st or R position (manual transaxle vehicle) or shift the selector lever to P position (automatic transaxle vehicle), apply the parking brake, and place wheel blocks in the position diagonally opposed to the jack: Changing a flat tire without using wheel blocks is dangerous because the vehicle may move and fall off the jack even with the shift lever in 1st or R position, or the selector lever is in P position, which could result in an accident...

Mazda CX-3 (2015-2024) Owner's Manual: To Temporarily Cancel

To temporarily cancel the system, use one of these methods: Slightly depress the brake pedal. (Manual transaxle) Depress the clutch pedal. Press the OFF/CAN switch. If the switch is pressed when the vehicle speed is 25 km/h (16 mph) or higher, the system reverts to the previously set speed...