Mazda CX-3: Before Using the Audio System / AUX/USB mode

Mazda CX-3 (2015-2025) Owner's Manual / Interior Features / Before Using the Audio System / AUX/USB mode

Audio can be heard from the vehicle's speakers by connecting a commercially-available portable audio unit to the auxiliary jack.

A commercially-available, non-impedance Mazda CX-3. AUX/USB mode stereo mini plug cable is required. Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle audio device by connecting a USB device to the USB port.

NOTE

(Type B)

The SD card slot is for the navigation system. For vehicles with the navigation system, the SD card (Mazda genuine) with stored map data is inserted into the SD card slot and used.

Type A

Mazda CX-3. AUX/USB mode

Type B

Mazda CX-3. AUX/USB mode

WARNING

Do not adjust the portable audio unit or a similar product while driving the vehicle: Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the portable audio unit or a similar product while the vehicle is stopped.

CAUTION

Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket. (If noise occurs, do not use the accessory socket.)

NOTE

  • This mode may not be usable depending on the portable audio device to be connected.
  • Before using the auxiliary jack/USB port, refer to the instruction manual for the portable audio device.
  • Use a commercially-available, non-impedance Mazda CX-3. AUX/USB mode stereo mini plug for connecting the portable audio unit to the auxiliary jack. Before using the auxiliary jack, read the manufacturer's instructions for connecting a portable audio unit to the auxiliary jack.
  • To prevent discharging of the battery, do not use the auxiliary input for long periods with the engine off or idling.
  • When connecting a device to the auxiliary jack or USB port, noise may occur depending on the connected device. If the device is connected to the vehicle's accessory socket, the noise can be reduced by unplugging it from the accessory socket.

How to connect USB port/Auxiliary jack

Type A

Mazda CX-3. AUX/USB mode

Type B

Mazda CX-3. AUX/USB mode

Connecting a device

 

If there is a cover on the AUX jack or USB port, remove the cover.

Connect the connector on the device to the USB port.

Connecting with a connector cable

If there is a cover on the AUX jack or USB port, remove the cover.

Connect the device plug/connector cable to the auxiliary jack/USB port.

WARNING

Do not allow the connection plug cord to get tangled with the parking brake or the shift lever (manual transaxle)/selector lever (automatic transaxle): Allowing the plug cord to become tangled with the parking brake or the shift lever (manual transaxle)/selector lever (automatic transaxle) is dangerous as it could interfere with driving, resulting in an accident.

CAUTION

Do not place objects or apply force to the auxiliary jack/USB port with the plug connected.

NOTE

  • Insert the plug into the auxiliary jack/USB port securely.
  • Insert or pull out the plug with the plug perpendicular to the auxiliary jack/USB port hole.
  • Insert or remove the plug by holding its base.
  • (Vehicles with USB port indicated with Mazda CX-3. AUX/USB mode

    Use the USB terminal indicated by the Mazda CX-3. AUX/USB mode mark when using Apple CarPlay™ and Android Auto™.

    Audio Control Switch

    Adjusting the Volume To increase the volume, press up the volume switch . To decrease the volume, press down the volume switch . Seek Switch AM/FM radio Press the seek switch ...

    Antenna

    ..

    Other information:

    Mazda CX-3 (2015-2025) Owner's Manual: Rear Cross Traffic Alert (RCTA)(Some models)


    The RCTA system is designed to assist the driver in checking the area to the rear of the vehicle on both sides while the vehicle is reversing by alerting the driver to the presence of vehicles approaching the rear of the vehicle. The RCTA system detects vehicles approaching from the rear left and right sides of the vehicle, and the rear of the vehicle while the vehicle is being reversed out of a parking space, and notifies the driver of possible danger using the Blind Spot Monitoring (BSM) warning indicator lights and the warning buzzer...

    Mazda CX-3 (2015-2025) Owner's Manual: Using ISOFIX Lower Anchor (Mexico)/Using LATCH Lower Anchor (Except Mexico)


    Your Mazda is equipped with ISOFIX/LATCH*1 lower anchors for attachment of specially designed ISOFIX/LATCH*1 child-restraint systems in the rear seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Most ISOFIX/ LATCH*1 child-restraint systems must also be used in conjunction with a tether to be effective...

    Categories

    Speedometer

    The speedometer indicates the speed of the vehicle.

    NOTE

    (Analog speedometer type)

    If a few seconds have elapsed after switching the ignition off, the needle may deviate. However, this does not indicate a problem.

    Speed Unit Selector (Digital Speedometer)(Some models)

    In some countries, you may have to change the speed units between km/h and mph.

    read more

     
    Copyright © 2025 www.macx3.net