Mazda CX-3: Fuses / Fuse Panel Description
Mazda CX-3 (2015-2026) Owner's Manual / Maintenance and Care / Owner Maintenance / Fuses / Fuse Panel Description
Fuse block (Engine compartment)
Fuse block (Left side)
Fuse Replacement
Replacing the fuses on the vehicle's left
side
If the electrical system does not work, first
inspect the fuses on the vehicle's left side.
Make sure the ignition is switched off,
and other switches are off...
Other information:
Mazda CX-3 (2015-2026) Owner's Manual: Active Driving Display (Some models)
WARNING Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident...
Mazda CX-3 (2015-2026) Owner's Manual: Vehicle Engine Control Unit Reset Procedure
NOTE This procedure is intended for vehicles with the engine oil flexible maintenance setting selected. After replacing the engine oil, have a repair shop such as an Authorized Mazda Dealer perform the initialization (engine oil data resetting) of the recorded value...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- Daytime Running Lights
- Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display Indication
- TCS OFF Switch
- New on site
- Most important about car
Anchor Bracket
Anchor brackets for securing child-restraint systems are equipped in the vehicle. Locate each anchor position using the illustration.
To install a child-restraint system, remove the head restraint. Always follow the instruction manual accompanying the child-restraint system.
Anchor bracket location
Use the indicated anchor bracket locations when installing a child-restraint system equipped with a tether.
Copyright © 2026 www.macx3.net