Mazda CX-3: When Driving / Automatic Transaxle
Upshifting
For normal acceleration, Mazda
recommends these shift points:
For cruising, Mazda recommends these
shift points:
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork...
Various Lockouts:
- Indicates that you must
depress the brake pedal and hold in the lock-release
button to shift (The ignition must be switched ON)...
Other information:
The display mode can be changed between
trip meter A and trip meter B by pressing
the selector while one of them is
displayed. The selected mode will be
displayed.
NOTE
When the ignition is switched to ACC or
off, the odometer or trip meters cannot be
displayed, however, pressing the selector
can inadvertently switch the trip meters or
reset them during an approximate
ten-minute period in the following cases:
After the ignition is switched to off from ON...
The SBS system alerts the driver of a possible collision using a display and
warning sound
if the radar sensor (front) and the Forward Sensing Camera (FSC) determine that
there is the
possibility of a collision with a vehicle ahead while the vehicle is being
driven at about 15
km/h or faster (10 mph or faster)...
Categories
WARNING
Do not stack cargo or objects higher than
the seatbacks:
Cargo stacked higher than the seatbacks is
dangerous. It can block your view in the
rearview mirror, which might cause you to
hit another car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.

read more