Mazda CX-3: Automatic Transaxle / Manual Shift Mode

Mazda CX-3 (2015-2024) Owner's Manual / When Driving / Automatic Transaxle / Manual Shift Mode

The manual shift mode gives you the feel of driving a manual transaxle vehicle by allowing you to operate the selector lever manually. This allows you to control engine rpm and torque to the drive wheels much like a manual transaxle when more control is desired. To change to manual shift mode, shift the lever from D to M.

Mazda CX-3. Manual Shift Mode

NOTE

Changing to manual shift mode while driving will not damage the transaxle.

To return to automatic shift mode, shift the lever from M to D.

NOTE

If you change to manual shift mode when the vehicle is stopped, the gear will shift to M1.

If you change to manual shift mode without depressing the accelerator pedal when driving in D range, 5th gear/6th gear, the gear will shift to M4/M5.

Active Adaptive Shift (AAS)

Active Adaptive Shift (AAS) automatically controls the transaxle shift points to best suit the road conditions and driver input. This improves driving feel...

Indicators

Manual shift mode indication In manual shift mode, the “M” of the shift position indication in the instrument panel illuminates. Gear position indication The numeral for the selected gear illuminates...

Other information:

Mazda CX-3 (2015-2024) Owner's Manual: Seat Precautions


WARNING Make sure the adjustable components of a seat are locked in place: Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place by attempting to slide the seat forward and backward and rocking the seatback...

Mazda CX-3 (2015-2024) Owner's Manual: Error Indications


If you see an error indication on the display, take appropriate action according to the following methods. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. CHECK USB When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device...

Categories

Speedometer

The speedometer indicates the speed of the vehicle.

NOTE

(Analog speedometer type)

If a few seconds have elapsed after switching the ignition off, the needle may deviate. However, this does not indicate a problem.

Speed Unit Selector (Digital Speedometer)(Some models)

In some countries, you may have to change the speed units between km/h and mph.

read more

 
Copyright © 2024 www.macx3.net