Mazda CX-3: Scheduled Maintenance / Maintenance Monitor
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant...
“Oil Change” with a flexible setting*1 is available. Consult your Authorized
Mazda Dealer
when you want to change the setting*2. Once the system turns on, the wrench
indicator light
in the instrument cluster will be illuminated when remaining oil life becomes
less than 1,000
km (600 mile), or remaining days are less than 15 (whichever comes first)...
Other information:
These lights turn on or flash to notify the user of the system operation
status or a system
malfunction.
*1 The light turns on when the ignition is switched on for an
operation check, and turns off
a few seconds later or when the engine is started...
The adaptive front lighting system (AFS) automatically adjusts the headlight
beams to the
left or right in conjunction with the operation of the steering wheel after the
headlights have
been turned on and the vehicle speed is about 2 km/h (2 mph) or higher...
Categories
We recommend the use of Genuine Mazda floor mats.
WARNING
Make sure the floor mats are hooked on the
retention pins to prevent them from
bunching up under the foot pedals:
Using a floor mat that is not secured is
dangerous as it will interfere with the
accelerator and brake pedal operation,
which could result in an accident.
Do not install two floor mats, one on top of
the other, on the driver's side:
Installing two floor mats, one on top of the
other, on the driver's side is dangerous as
the retention pins can only keep one floor
mat from sliding forward.
Loose floor mat(s) will interfere with the
foot pedals and could result in an accident.
If using an all-weather mat for winter use
always remove the original floor mat.
read more