Mazda CX-3: Meters and Gauges / Dashboard Illumination

Mazda CX-3 (2015-2022) Owner's Manual / When Driving / Instrument Cluster and Display / Meters and Gauges / Dashboard Illumination

(Without auto-light control)

When the position lights are turned on with the ignition switched ON, the brightness of the dashboard illumination is dimmed.

(With auto-light control)

When the position lights are turned on with the ignition switched ON, the brightness of the dashboard illumination is dimmed. However, when the light sensor detects that the surrounding area is bright such as when the position lights are turned on in the daytime, the dashboard illumination does not dim.

NOTE

  • (With auto-light control)

    When the ignition is switched ON in the early evening or at dusk, the dashboard illumination is dimmed for several seconds until the light sensor detects the brightness of the surrounding area, however, the dimmer may cancel after the brightness is detected.

  • When the position lights are turned on, the position lights indicator light in the instrument cluster turns on. Refer to Headlights.

The brightness of the instrument cluster and dashboard illuminations can be adjusted by rotating the knob.

  • The brightness decreases by rotating the knob to the left. A beep sound will be heard when the knob has been rotated to the maximum dim position.
  • The brightness increases by rotating the knob to the right.

Mazda CX-3. Dashboard Illumination

Function for cancelling illumination dimmer

The illumination dimmer can be canceled by rotating the dashboard illumination knob to the right until a beep sound is heard while the instrument cluster is dimmed with the ignition switched ON. If the instrument cluster's visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer.

NOTE

When the illumination dimmer is canceled, the instrument cluster cannot be dimmed even if the position lights are turned on.

When the illumination dimmer is canceled, the screen in the center display switches to constant display of the daytime screen.

    Fuel Gauge

    The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full...

    Outside Temperature Display

    When the ignition is switched ON, the outside temperature is displayed. NOTE Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions: Significantly cold or hot temperatures...

    Other information:

    Mazda CX-3 (2015-2022) Owner's Manual: Radio Reception


    AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, 2 stations may sometimes be picked up on the same frequency at the same time...

    Mazda CX-3 (2015-2022) Owner's Manual: Operating Tips for iPod


    This unit supports playback of music files recorded to an iPod. * iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The iPod may not be compatible depending on the model or OS version. In this case, an error message is displayed...

    Categories

    Anchor Bracket

    Anchor brackets for securing child-restraint systems are equipped in the vehicle. Locate each anchor position using the illustration.

    To install a child-restraint system, remove the head restraint. Always follow the instruction manual accompanying the child-restraint system.

    Anchor bracket location

    Use the indicated anchor bracket locations when installing a child-restraint system equipped with a tether.

    Mazda CX-3. Anchor Bracket

    read more

     
    Copyright © 2022 www.macx3.net